Viscometer Petroleum Equipment BJO1CC1 (BPTL-107)
Low Temperature Kinematic Viscometer
- Sea, Air, Door to Door Shipping
- 1 Year Warranty
- US & European Standards
Specifications
| Model | BJO1CC1 |
| Capillary viscometer tubes (Pinkevitch viscometer) | 6 pieces in total and the diameters for each is 0.6, 0.8, 1.0, 1.2, 1.5, 2.0 mm. |
| Temperature range | -65 °C ~ room temp |
| Temperature control accuracy | ± 0.1 °C |
| Ambient temperature | 15 °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Heating device | Electric heater; power ≤ 600 W |
| Refrigeration unit | Double refrigeration compressors |
| Temperature sensor | RTD, Pt100 |
| Constant temperature bath | Stainless steel |
| Maximum power consumption | 1700 W |
| Power supply | AC (220 ± 10%) V 50Hz |
| Dimension | 530x460x870 mm |
Description
Viscosity of an oil is defined as its resistance to flow and Viscometer measures the flow. Monitoring viscosity is one of the most important components of any oil analysis program. Minute changes in viscosity at operating temperatures can be magnified to the extent that an oil is no longer able to provide adequate lubrication and efficiency in preventing friction between moving parts.
Features
The temperature of the constant temperature bath is controlled by the temperature controller, and the refrigeration and heating parts compensate each other to achieve heat balance and maintain a certain accuracy in controlling the bath temperature. The instrument can install two samples for test at the same time. The constant temperature bath is equipped with a stirring motor to make the temperature in the whole constant temperature bath uniform.
Applications
Petroleum Industry, Oil and Gas Industry
