Pilot-scale Freeze Dryer BFR1L1
Freeze Dryer- Sea, Air, Door to Door Shipping
- 1 Year Warranty
- US & European Standards
Specifications
| Model | BFR1L1 |
| Chamber | AISI 304L /316L |
| Shelves | AISI 304L /316L |
| Shelf Size | 350 x 400 |
| Chamber Door | Acrylic or stainless door |
| Door lock system with safe bolt | 1set |
| Product sensors | Pt-100 |
| Temperature sensors(thermal fluid) | Pt-100 |
| Finish | Ra≤0.4μm |
| Level | 0.5mm/m |
| Shelves temperature Min | < -60°C |
| Shelves temperature Max | +65°C |
| Shelves temperature uniformity | ±1°C(after balance) |
| Spacing | 100mm (Top stopper type is 80mm) |
| Chamber type | Rectangular |
| Insulation | B1 Cotton insulation |
| Open direction | Left or right |
| Condenser (with coiled pipe) | |
| - Condenser | AISI 304, 316 optional |
| - Condenser coiled pipe | Coil inside or round type (coil outside) |
| - Temperature sensors(condenser) | Pt-100 |
| - Coiled temperature Min | ≤ -85°C |
| - ice capacity in 24hour | 8kg |
| - Condenser frosting capacity | Max 10kg/batch |
| - Condenser type | round |
| Refrigeration system | |
| - Compressor model and number | 2HP Embraco |
| - Refrigerant | R507+R508B |
| - Oil separator | Emerson / similar type |
| - Automatic protective device for pressure | DANFOSS |
| - Pressure meter | REFCO or similar type |
| - Expansion valve | DANFOSS |
| - Shelf cooling time (without load) | +20 ~ -40°C ≤ 60 minutes |
| - Condenser cooling time(without load) | +20 ~ -40°C ≤ 30 minutes |
| Vacuum system | |
| - Vacuum pump | DRV24 (24m³/h) |
| - Isolation valve of pump well | Electric valve |
| - Vacuum gauge | Posifa |
| - Final vacuum | ≤1 Pa |
| - Evacuation time | From atm to 20 Pa ≤ 30 min |
| - Leakage rate | 5x10^-3 Pa·m³/sec |
| Circulation system | |
| - Circulation pump | Grundfos |
| - Thermal fluid | 5cs, USA Dowcorning Silicon oil (low viscosity) |
| - Heater | 500w |
| - Plate heat exchanger | |
| - Temperature sensors(thermal fluid) | Pt-100 |
| - Heating rate | 1°C/min |
| Electric control system | |
| - Electric standard | IEEE |
| - PLC | Siemens S7-200 |
| - Breaker | schneider |
| - AC contactor | schneider |
| - Control type | Manual and automatic |
| Utility list | |
| - Electricity-total electrical load | 5.5Kw (380V, 50Hz, 3Phase) or 220V-240V 3 phaseor |
| The equipment's main technique parameter | |
| - Machine construction | Wall mounted ,GMP type |
| - Weight (approx) | 480 kg |
| - Gross weight (approx) | 580kg |
| - Package size | 850 x 1450 x 1980 mm |
| - Capacity of raw material for freeze drying (suggestive value) | 5 kg/batch |
Description
Command OS2.1 control system was developed to meet the lyophilization requirements of today's pharmaceutical and biotechnology applications.The system packs the highest level process_x0002_control and flexibility into a software package that is as easy to use as it is multi-functional.
The SCADA system solution to deliver superior functionality, as well as faster, more intelligent control of the freeze-drying process and related functions.