Basic Water Purification System BBPS-505

Basic Water Purification System BBPS-505

  • Sea, Air, Door to Door Shipping
  • 1 Year Warranty
  • US & European Standards
This basic series is ideal for wide range of applications. It produces RO, Deionized water and Ultrapure water. The organic rejection rate is greater than 99% using reverse osmosis. The resistivity reaches up to 18.2M?.cm which completely meets the highest grade I standard.
  • With tap water inlet, to produce RO water and ultrapure water,quality can reach to above10MΩ.cm.
  • Built-in 20 liters airtight plastic pressure water tank
  • Built-in 13 liters high-capacity polishing resin cartridge
  • Unique design and easy-to-replace cartridges pack unit.
Specification Features Applications
Feed Water Requirements*: 
      Water InletTap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)
      Temperature5-45°C
      Pressure1.0-4.0 Kgf/cm²
Flow Procedure**PF+AC+RO+DI+TF
Ion rejection rate96%-99% (New RO membrane)
Organic rejection rate>99%,when MW>200 Dalton
Particles and bacteria rejection rate>99%
Bacteria<0.1 cfu/ml
Output(25°C)****30 L/hrs
Pure water outletRO water and Ultrapure water
Water Quality MonitorPortable TDS/conductivity test pen + on-line resistivity monitor
DimensionLxWxH410x220x420 mm
Weight20 kg
Standard configurationMain body (Including 1 set of cartridges)+15 liters tank+ TDS pen +accessory bag
Power Consumption (W)72 W
Power SupplyAC110-220 V, 50/60 Hz
Note*The feed water quality will influence the pure water's quality and cartridges life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange, UV:ultraviolet, UF:ultrafiltration, TF:terminal microfiltration. ***Value of number will be influenced by temperature and feed water quality. ****All the specifications are tested under the situation:feed water's TDS=200ppm, 25°C, 50psi and 15% recovery rate.
Deionized water quality: 
      Particle(>0.2µm)<1/ml
Ultrapure Water Quality: 
      Resistivity(25°C)18.2 MΩ.cm
      Heavy Metal Ion-
      TOC***<10 ppb
      Heavy metal ion<0.1 ppb
      Flow rate2.0 L/min (with pressure tank)
  • With tap water inlet, to produce RO water and ultrapure water,quality can reach to above10MΩ.cm.
  • Built-in 20 liters airtight plastic pressure water tank
  • Built-in 13 liters high-capacity polishing resin cartridge
  • Unique design and easy-to-replace cartridges pack unit.
  • Data storage and RS 232/USB communication port.
  • 3 way on-line water quality sensor,multiple alarm.
  • Life-span of cartridges´ display and alarm.
  • System circulation function,system sterilization procedure.(optional)
  • Molding process,high-strength, streamline plastic shell.
  • The graphic display clearly indicates all system´s parameters. From water quality to knowing when it is time to change the purification pack,you´ll see at a glance what is need
  • For ease-of-use,the main purification technologies are contained in an innovative all-in-one pack that mean you can change it in just a couple of minutes.
  • The system requires no special installation,connect the system to your tap water supply it´s ready to use.
Laboratory, Manufacturing, Reefkeeping, Aquarium, Laboratory, Research
Request Quote
Name*:
Email*:
WhatsApp :
Product :
Reason*: Quote Inquiry
Subject :
Message*: